NDC Conrod Bearing Set | Daihatsu CB CD
$31.00
or 4 interest-free payments of $7.75 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
These connecting-rod (big-end) bearings tie the pistons to the crankshaft of the Daihatsu CB CD and take every combustion load.
Not sure which size you need?
These parts are made to suit your engine’s machined size, so choose the size that matches yours. STD suits a crank or bore that has not been machined. 0.25, 0.50 and the other sizes are for one that has, and your machinist will give you the figure. Not sure? Text us your engine number or your machinist’s numbers and we’ll help you choose before you order.
Not measured yet? Send a photo of the machine shop docket. That’s all we need.
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded.
Complete the job
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Daihatsu | — | — | — | — |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
These connecting-rod (big-end) bearings tie the pistons to the crankshaft of the Daihatsu CB CD and take every combustion load.
Supplied by Willys Workshop. NDC engine bearings. NDC is a Japanese manufacturer producing OEM-spec engine bearings used by Toyota, Nissan, Mazda and other vehicle manufacturers.
- Direct OEM-equivalent fitment
- Japanese-engineered to factory tolerances
Specifications
| Brand | NDC |
|---|---|
| Part number | 3B8010 |
| Maximum shaft diameter | 40.000 mm |
| Minimum housing bore | 43.000 mm |
| Maximum length | 18.00 mm |
| In the box | 3 x Conrod Bearings |
Manufacturer part number: 3B8010
This part is listed to suit the Daihatsu CB CD – always confirm against your engine code or VIN before ordering, and our team can verify the correct part for your build. Shipped Australia-wide or fitted in-store at our Oxley (Brisbane) and Warana (Sunshine Coast) workshops, where we carry out full engine rebuilds.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
These connecting-rod (big-end) bearings tie the pistons to the crankshaft of the Daihatsu CB CD and take every combustion load.
Additional information
| Weight | 0.4 kg |
|---|---|
| Dimensions | N/A |
| Size | STD, 0.50 |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Engine rebuild and fitting services are available at Willys Workshop.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page
