Lightweight GU 4.2 Turbo Billet Steel Flywheel (suits Viper clutch upgrade)
$763.40
or 4 interest-free payments of $190.85 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
This Light Weight Billet Steel Flywheel is made specifically for the Viper upgrade. Be aware that this flywheel has the 72mm crank location which will fit the factory GU Turbo crank. Made in-house, Brisbane, Australia. Suits Clutch Kit: NPC7235-1C ,
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Patrol | GU Y61 | — | TD42 |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Type: Lightweight Billet Steel Flywheel
Product Weight: 10.3kg
Flywheel Dimension: flat
Ring Gear: Yes
Ring Gear Part Number: RG122NS
Replaces Dual Mass Flywheel: No
Spigot: Not Included
Dowels: Included
Additional information
| Weight | 10.3 kg |
|---|---|
| Dimensions | 36.0 × 35.0 × 10.0 cm |
| Make | Nissan |
| Model | Patrol |
| Series | TD42 TURBO T AND TI ENGINES |
| Clutch Type | Lightweight Performance Flywheels |
Warranty
Backed by the manufacturer's published warranty terms and Australian Consumer Law statutory guarantees.
For claims or fitment support, contact Willys Workshop: Warana (07) 5619 7869, Oxley (07) 3377 3421, or sales@willysworkshop.com.au.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
Fitting & Setup Guides
NPC fitting and setup sheets for this clutch. Read the setup sheet and follow the bed-in procedure to keep your warranty valid.
- Clutch & Flywheel Setup Sheet Conventional
- Clutch & Flywheel Setup Sheet CSC
- Ideal Clutch Fork Position
- Notice Sheet 10 Bed in Procedure
- Fitting Sheet 6 Generic Fitting Sheet
- Fitting Sheet 5 Nissan Patrol Viper Clutch TD42 TB42 TB45 TB48
- Notice Sheet 7 Viper Kit Bearing
- Fitting Sheet 5b Nissan Patrol Viper Clutch GU ZD30 engines
