Key specs
- Material
- F810
- Shaft diameter
- Min: 39.985 mm, Max: 40.000 mm
- Bore diameter
- Min: 43.000 mm, Max: 43.024 mm
- In the box
- 3 x Conrod Bearings
Engine rebuilds in-house
We rebuild engines at our Oxley and Warana workshops. Ask us for a price on the full job.
Get a fitting quoteSend your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
- Returns within 30 days
- 12 month warranty
- Fitting available
ACL Conrod Bearing Set | Daihatsu ED-10 EJ ED | 0.25mm Undersize
- Fits ED-10
- Fits EJ
- Fits ED
$47.00
Including GST
Not sure which size you need?
These parts are made to suit your engine’s machined size, so choose the size that matches yours. STD suits a crank or bore that has not been machined. 0.25, 0.50 and the other sizes are for one that has, and your machinist will give you the figure. Not sure? Text us your engine number or your machinist’s numbers and we’ll help you choose before you order.
Not measured yet? Send a photo of the machine shop docket. That’s all we need.
or 4 interest-free payments of $11.75 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Will it fit your vehicle?
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Check my fitmentor call(07) 5619 7869or text0485 885 957oremail us
Description
Size: 0.25mm undersize. Suits crankshafts with journals ground 0.25mm undersize. This is not a standard-size set.
These connecting-rod (big-end) bearings tie the pistons to the crankshaft of the Daihatsu ED-10 EJ ED and take every combustion load.
Supplied by Willys Workshop. ACL, the Australian-engineered engine-bearing manufacturer used in OEM and aftermarket rebuilds globally.
- Australian made
- OEM-spec materials and tolerances
Manufacturer part number: 3B8120
This part is listed to suit the Daihatsu ED-10 EJ ED – always confirm against your engine code or VIN before ordering, and our team can verify the correct part for your build. Shipped Australia-wide or fitted in-store at our Oxley (Brisbane) and Warana (Sunshine Coast) workshops, where we carry out full engine rebuilds.
Image note: the photo shown is a representative image of this part type, not a photograph of the exact item. Product specifications, fitment and part number are as listed above.
Specifications
| Brand | ACL |
|---|---|
| Part number | 3B8120 |
| Material | F810 |
| Shaft diameter | Min: 39.985 mm, Max: 40.000 mm |
| Bore diameter | Min: 43.000 mm, Max: 43.024 mm |
| In the box | 3 x Conrod Bearings |
| Size | 0.25 |
| Shipping weight | 0.3 kg |
| Shipping dimensions | 30 × 25 × 5 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Engine rebuild and fitting services are available at Willys Workshop.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
These connecting-rod (big-end) bearings tie the pistons to the crankshaft of the Daihatsu ED-10 EJ ED and take every combustion load.
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page -
Select options This product has multiple variants. The options may be chosen on the product page
-
Select options This product has multiple variants. The options may be chosen on the product page
