Super Heavy Duty Button Clutch & Flywheel Package (firm pedal feel) – Holden Commodore (NPC7296-3D)
$1,640.00
or 4 interest-free payments of $410.00 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
NPC Super Heavy Duty button clutch kits are recommended for hard road use, circuit, rally, drag or drift racing. Super Heavy Duty Button clutches utilise ceramic friction material offering outstanding performance with positive engagement. Made by riveting 3, 4, 5 or 6 buttons per side to a laser-cut
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Holden | Commodore | VT-VX | — | — |
| Holden | Commodore | VY-VZ | — | — |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Type: Ceramic Button
Clutch Plate Dimension: 11X1 1/8X26T
Dual Mass Flywheel: N/A
Solid Flywheel: Included
Concentric Slave Cylinder: Included
Maximum Measured Dyno Figures at the Wheels: 600RWKW
Spigot: Included
Aligning Tool: Included
More info: visit Resources
Additional information
| Weight | 26 kg |
|---|---|
| Dimensions | 42.0 × 38.0 × 26.0 cm |
| Make | Holden |
| Model | Commodore |
| Release Year | 06/99 – 02/06 |
| Series | LS2), VT, VU, VX, VY, VZ (LS1 |
| Clutch Type | Ceramic Button | Super Heavy Duty |
Warranty
Backed by the manufacturer's published warranty terms and Australian Consumer Law statutory guarantees.
For claims or fitment support, contact Willys Workshop: Warana (07) 5619 7869, Oxley (07) 3377 3421, or sales@willysworkshop.com.au.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
Fitting & Setup Guides
NPC fitting and setup sheets for this clutch. Read the setup sheet and follow the bed-in procedure to keep your warranty valid.
- Clutch & Flywheel Setup Sheet Conventional
- Clutch & Flywheel Setup Sheet CSC
- Ideal Clutch Fork Position
- Notice Sheet 10 Bed in Procedure
- Fitting Sheet 6 Generic Fitting Sheet
- Fitting Sheet 10 Holden, Isuzu Clutch Pull Type Fork Orientation
- Fitting Sheet 1 Concentric Slave Cylinder Crush
- Fitting Sheet 2 Bell Housing Modification for Slave Cylinder
