Willys Workshop VRS Gasket Set – Cathedral Port | Holden LS1
$295.90
or 4 interest-free payments of $73.98 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
This gasket restores a clean factory seal on the Holden LS1.
Willys Fitment Guarantee
Covered when this part is listed for your exact vehicle in the Fitment tab, or we’ve confirmed it from your rego or VIN. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Your exact vehicle must be listed in the Fitment tab or confirmed by rego/VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Complete the job
- Willys Workshop Head Bolt Set | Holdens LS1 - Pre 2001$149.00Add
- Willys Workshop Valve Stem Seals - Set of 16 | Holden LS1$54.95Add
Doing the full rebuild?
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine | Notes |
|---|---|---|---|---|---|
| Holden | — | — | — | LS1 | |
| Holden | Commodore | VT-VX | Jun 1999 – Sep 2002 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:661;VM:664 (sourced-2) LS1 in VT-VX; https://en.wikipedia.org/wiki/Holden_Commodore_(VT) |
| Holden | Commodore | VY-VZ | Sep 2002 – 2005 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:667;VM:670 (sourced-2) LS1 in VY-VZ; https://en.wikipedia.org/wiki/Holden_Commodore_(VY) |
| Holden | Monaro | V2 (2001-2004) | Oct 2001 – Aug 2004 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:721 (sourced-2) LS1 in V2 (2001-2004); https://australiancar.reviews/review-holden-v2-monaro-2001-04/ |
| Holden | Monaro | VZ (2004-2005) | Sep 2004 – 2005 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:722 (sourced-2) LS1 in VZ (2004-2005); https://goauto.com.au/used-car-research/holden/monaro/2004-09-01/2228.html |
| Holden | Statesman / Caprice | WH (1999-2003) | Jun 1999 – May 2003 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:757 (sourced-2) LS1 in WH (1999-2003); https://australiancar.reviews/review-holden-wh-statesman-and-caprice-1999-03/ |
| Holden | Statesman / Caprice | WK (2003-2004) | May 2003 – Aug 2004 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:760 (sourced-2) LS1 in WK (2003-2004); https://australiancar.reviews/review-holden-wk-statesman-and-caprice-2003-04/ |
| Holden | Statesman / Caprice | WL (2004-2006) | Aug 2004 – 2005 | LS1 | vp1022:engine-master: title names LS1; VEHICLE-MASTER VM:762 (sourced-2) LS1 in WL (2004-2006); https://australiancar.reviews/review-holden-wl-statesman-and-caprice-2004-06/ |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
This gasket restores a clean factory seal on the Holden LS1.
Supplied by Willys Workshop, diesel and performance specialists in Brisbane and on the Sunshine Coast.
Manufacturer part number: HOLLS1VRS-NVE
This part is listed to suit the Holden LS1 – always confirm against your engine code or VIN before ordering, and our team can verify the correct part for your build. Shipped Australia-wide or fitted in-store at our Oxley (Brisbane) and Warana (Sunshine Coast) workshops, where we carry out full engine rebuilds.
Additional information
| Weight | 1 kg |
|---|
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Engine rebuild and fitting services are available at Willys Workshop.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
