Mitsubishi Fuso Canter 4P10 3.0L Common Rail Fuel Pump
$1,645.00
or 4 interest-free payments of $411.25 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Genuine Bosch CP4S1 high pressure common rail pump for the Mitsubishi Fuso Canter 4P10 3.0L diesel, Bosch 0 445 010 559.
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine | Notes |
|---|---|---|---|---|---|
| Mitsubishi | Canter | — | — | 4P10 | DD lists it as the 4P10 pump; Bosch OE refs are Iveco/CNH/Peugeot (F1C family) |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Genuine Bosch high pressure common rail pump for the Mitsubishi Fuso Canter with the 3.0 litre 4P10 diesel. Bosch part number 0 445 010 559, type CP4S1. It is the supply pump that builds rail pressure for the injectors.
Fitment
- Mitsubishi Fuso Canter, 4P10 3.0L diesel (as listed by our supplier, Diesel Distributors)
The suction control valve on this pump is Bosch 1 462 C00 998. Pumps are engine specific, so include your VIN when you order and we will confirm the unit.
Specifications
| Brand | Bosch |
|---|---|
| Part number | 0 445 010 559 |
| Bosch type | CR/CP4S1/R45/20 |
| Designation | High-pressure pump, CR system |
| Engine | Mitsubishi 4P10, 3.0L diesel |
| Suction control valve | 1 462 C00 998 |
| OE cross-references (Bosch catalogue) | Iveco 504342423, 504371260; Case New Holland 504342423; Peugeot 16 237 906 80, 1920 SC |
When to replace
- Hard starting or extended cranking
- Power loss or limp mode under load
- Rough idle, stalling or hesitation
- Low rail-pressure fault codes (e.g. P0087) and excessive smoke
Not sure which one fits? Send us your rego or VIN and we’ll confirm the exact part. Use the part enquiry form or call (07) 5619 7869. Happy to check before or after you order.
Warranty: 12 months from the date of purchase or installation, whichever is later.
Returns: 30 days to change your mind. Parts need to be unused and in their original packaging; a 15% restocking fee applies and return postage is at your cost. If a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee. Full returns policy.
Damaged or faulty: please check the goods before you sign the delivery note and tell us straight away if anything arrived damaged in transit. If a part is faulty, contact us and we’ll sort it out. Nothing here limits your rights under Australian Consumer Law.
Free Shipping Australia-Wide
- Free express shipping on this item to anywhere in Australia, on its own or with other free-shipping parts.
- In-stock orders are dispatched by the supplier, usually within 1-2 business days.
- Delivery usually takes 2–7 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Urgent, or have a freight question? Call us on (07) 5619 7869.
Additional information
| Weight | 6 kg |
|---|---|
| Make | Mitsubishi |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
