Ford Next Gen T6.2 Ranger V6 3in Turbo Back Without Cat, With Hotdog,Twin Chrome Tip Side Exit (SSMKFD0339T)
$2,813.91
Zip and humm are available over the phone: (07) 5619 7869
New Manta turbo-back exhaust system for the Ford Ranger.
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Also fits your Ranger
- Next Gen T6.2 Ford Ranger / Amarok TDI600 V6 Diesel 3in Centre Hotdog (MBM663PHD)$421.77Add
- PreLine-Plus + Catch Can Kit NEXT-GEN RANGER / EVEREST V6 (PLPV671DPC)$900.00Add
- WCS Parabolic Leaf Spring for Ford Ranger PY 4WD (2022 on) (excluding Raptor) [250kg] [Rear] Original price was: $464.00.$394.40Current price is: $394.40.Add
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Ford | Ranger | Next-Gen P703 | — | — |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
The Ford Next Gen T6.2 Ranger V6 3in Turbo Back Without Cat, With Hotdog,Twin Chrome Tip Side Exit is a genuine Manta part, engineered to suit the Ford Ranger.
Turbo-Back Systems
A turbo-back system replaces the exhaust from the turbocharger outlet rearward as one matched kit, including the dump or engine pipe closest to the turbo. Mandrel-bent tubing throughout improves flow and spool and helps lower exhaust-gas temperatures under load.
About Manta
Manta Performance is an Australian exhaust manufacturer, building mandrel-bent cat-back, DPF-back and turbo-back systems in aluminised and stainless steel to improve flow, response and exhaust-gas temperatures on diesel and performance vehicles.
Specifications
- Pipe diameter: 3″
- Config: Turbo-back
Vehicle fitment
Engineered to suit the Ford Ranger. Confirm your exact variant and build date against the part number (SSMKFD0339T) before ordering, or contact our team and we will check it for you.
Delivery
Flat $188.50 delivery to any address in Australia. Full systems ship direct from Manta on a long-goods freight service, so the freight you see at checkout is the freight you pay, with nothing to quote after you order. In-stock items ordered before 11am AEST on a business day are dispatched the same day. Items shown as available to order are dispatched in 3-5 business days. Transit is then 3 to 10 business days depending on your state.
Genuine-new only. Fitting available at Willys Workshop, Oxley (Brisbane) and Warana (Sunshine Coast). Not sure it is the right part for your setup? Get in touch for a quote and fitment check.
Image note: the photo shown is a representative image of this part type, not a photograph of the exact item. Product specifications, fitment and part number are as listed above.
Additional information
| Weight | 25 kg |
|---|---|
| Make | Ford |
| Model | Ranger |
Warranty
Backed by the manufacturer's published warranty terms and Australian Consumer Law statutory guarantees.
For claims or fitment support, contact Willys Workshop: Warana (07) 5619 7869, Oxley (07) 3377 3421, or sales@willysworkshop.com.au.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
