Wiseco Professional Ford 5.0L Coyote Piston Set of 8 – 3.635 in. Bore – 1.176 in. CH, 2.00 CC
$2,126.82
Zip and humm are available over the phone: (07) 5619 7869
Bore 3.635 in · Compression height 1.176 in · Volume 2.00 cc · Set of 8 · rings included · wrist pins included
Available to order – usually ships in 2-3 weeks
Check fitment by rego or VINFast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Ford | — | — | — | — |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Set of 8 Wiseco Professional Series forged pistons for the Ford 5.0L Coyote: 3.635 in (92.33 mm) bore, 1.176 in (29.87 mm) compression height and +2.00 cc crown volume. Rings and wrist pins are included.
What’s in the box
- 8 forged pistons
- 8 wrist pins (22.00 mm / 0.866 in diameter, 5115 steel, floating)
- Piston ring set
Matching it to your Ford 5.0L Coyote
Wiseco list this set for a 3.652 in stroke and 5.933 in connecting rods. Compression height plus rod length plus half the stroke comes to 8.935 in (226.95 mm): compare that with your block’s deck height to see where the piston sits at top dead centre.
Crown volume is quoted as +2.00 cc: a positive figure means a dome that takes volume out of the combustion chamber. Work out the compression ratio for your combination (chamber volume, gasket bore and thickness, deck clearance) before you order.
The bore size is the finished bore these pistons are made for, so have the block measured and then bored and honed to suit, with piston-to-wall clearance set to Wiseco’s figure for part K0085X05.
Material: 2618 aluminium, the low-silicon alloy usually chosen for boosted and high-load engines (it needs more piston-to-wall clearance than 4032).
Forging: strutted design, with a coated skirt.
Ring grooves: 1.5 mm top, 1.5 mm second and 3.0 mm oil.
Specifications
| Bore Diameter | 3.635 in |
|---|---|
| Compression Height | 1.176 in |
| Forging Type | Strutted |
| Oil Ring Thickness | 3.0 mm |
| Piston Material | 2618 |
| Piston Quantity | 8 |
| Piston Volume | 2.00 cc |
| Ring Set Included | Yes |
| Rod Length | 5.933 in |
| Second Compression Ring Thickness | 1.5 mm |
| Skirt Coating | Yes |
| Stroke | 3.652 in |
| Top Compression Ring Thickness | 1.5 mm |
| Wrist Pin Included | Yes |
| Wrist Pin Material | 5115 |
| Wrist Pin Outer Diameter | 0.866 in |
| Wrist Pin Style | Floating |
Boostline conrods listed for this engine family: Boostline Connecting Rod Kit | Ford Mod 5.933in | ARP2000. This set is listed for 5.933 in rods, so match the length.
More: Ford Coyote & Modular forged pistons · all performance pistons · Wiseco
Wiseco part number: K0085X05
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Available to order – usually ships in 2–3 weeks.
- Freight is quoted after you order – we confirm the cost to your address before dispatch.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
Additional information
| Make | Ford |
|---|
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
