Description
Genuine Haltech gear, stocked and supported by the team at Willys Workshop, diesel and performance specialists in Brisbane and the Sunshine Coast.
Overview
VCU OVERVIEW
Nexus R5 is Haltech’s flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)
18 x peak/hold injector drivers (can be used as low side drive outputs)
12 x low current ignition outputs (can be used as low side drive outputs)
8 x low side drive outputs, PWM capable (DPOs)
4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
Features
- VCU FEATURES
- Controlled via NSP (Nexus Software Programmer)
- Long Term Learning
- Stepper Motor Control
- 4D Closed Loop Boost Control
- Closed Loop CO2 Control
- Rotational Idle
- Launch Control
- Traction Control
- Anti-Lag
- Dual Knock Control
- Trans Brake Control
- Race Timer
- Multi Stage Fuel Injection
- Multi-level Engine Protection
Specifications
- | Analog Voltage Inputs (AVI) | 23 |
- | Differential Engine Position Inputs | 2 (Trigger and Home) |
- | Digital Pulsed Inputs (DPI) | 0 |
- | Synchronized Pulsed Inputs (SPI) | 10 |
- | Knock Sensor Inputs | 2 |
- | On-board Wideband Controller | 2 x NTK/LSU 4.9 |
- | Injection | 18 (peak and hold) |
- | Ignition | 12 |
- | Ignition Switch Input | 1 |
- | Engine Control Relay output | 0 |
- | Total Digital Pulsed Outputs (DPO) | 8 |
- | Half Bridge Outputs (HBO) | 4 8A |
- | On-Board PDM | YES |
- | 25A High Current Outputs (HCO) | 4 |
- | CAN Bus Networks | 3 |
- | MAP sensor | External |
- | Inertia / G-Sensor | YES |
- | USB 2.0 | USB-C |
- | Low Power Up via Cable | YES |
- | Wi-Fi | YES |
Note: Haltech products are intended for sanctioned off-road/competition use. Ask our team about compliant options for your application.
