Haltech HC5 – Hydraulic Crimper
$199.00
or 4 interest-free payments of $49.75 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
HC5 Hydraulic Crimper 5 TON
Available to order – usually ships in 2-3 weeks
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
Universal fit Not made for one vehicle. It fits by size, thread or specification, so check the dimensions in the description against your application.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
The Haltech HC5 – Hydraulic Crimper is supplied new and genuine through Willys Workshop.
Genuine Haltech gear, stocked and supported by the team at Willys Workshop, diesel and performance specialists in Brisbane and the Sunshine Coast.
Overview
HC5 Hydraulic Crimper 5 TON
Specifications
| Brand | Haltech |
|---|---|
| Part number | HT-070306 |
| In the box | 1 x Hydraulic crimping tool. Rated to 5 Ton; 8 x Die Sets, (Sizes 4,6,10,16,25,35,50,70mm2); 1 x Hydraulic Rebuild Kit; 1 x Moulded Carry Case; 1 x Quick Start Guide |
Note: Haltech products are intended for sanctioned off-road/competition use. Ask our team about compliant options for your application.
About Haltech
Haltech is an Australian engine-management manufacturer whose ECUs, wideband controllers and accessories are the backbone of serious tuning builds worldwide. Willys Workshop is a Haltech dealer and tuning workshop, so your gear comes with real calibration support behind it.
Fitment
Confirm your exact vehicle, engine and build date against the part number (HT-070306) before ordering, or contact our team and we will check it for you.
Delivery
Live freight is calculated at checkout on your postcode, or contact us for a freight quote to your address before you order.
Fitting available at Willys Workshop, Oxley (Brisbane) and Warana (Sunshine Coast). Not sure it is the right part for your setup? Get in touch for a quote and fitment check.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Available to order – usually ships in 2–3 weeks.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
HC5 Hydraulic Crimper 5 TON
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Haltech: Limited 12 Month Warranty
Haltech warrants its products to be free from defects in material or workmanship for 12 months from the date of purchase.
- Defective units will be replaced or repaired when returned with proof of purchase
- Returns must ship via tracked freight with insurance and proof of delivery
- Sensors and accessories supplied in sealed packaging are non-refundable once the seal is opened (per Haltech policy). This does not affect your rights for faulty goods
- Off-road / competition use only. See Haltech's emissions disclaimer on each product
Tuning support, harness diagnostics and ECU configuration available in-workshop at Willys.
Read the full Haltech warranty terms →
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
