Have it fitted at Willys
We fit parts at our Oxley and Warana workshops. Order the part and we'll book you in, or ask for a fitted price first.
Get a fitting quoteSend your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
- Returns within 30 days
- 12 month Haltech warranty
- Fitting available
Haltech Engine Management ECUs
Haltech Elite 1000/1500 Plug'n'Play Adaptor Harness - Mitsubishi Galant VR4 (ECU not included)
- Fits Mitsubishi
- Fits Galant
$755.00
Including GST
Available to order – dispatched in 1-2 business days
or 4 interest-free payments of $188.75 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | — | — | — | — |
| Mitsubishi | Galant | — | — | — |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Check my fitmentor call(07) 5619 7869or text0485 885 957oremail us
Description
Genuine Haltech gear, stocked and supported by the team at Willys Workshop, diesel and performance specialists in Brisbane and the Sunshine Coast.
Overview
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug’n’Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
A simple Haltech Plug’n’Play product that allows you to be up and running in just a few hours.
The quick start guide will walk you through installation of the Haltech Plug’n’Play adaptor into your vehicle.
The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
Features
- This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
Note: Haltech products are intended for sanctioned off-road/competition use. Ask our team about compliant options for your application.
Specifications
| Brand | Haltech |
|---|---|
| Part number | HT-140831 |
| In the box | Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins |
| GTIN | 9356450006408 |
| Shipping weight | 1.5 kg |
| Shipping dimensions | 25 × 20 × 12 cm |
Haltech: Limited 12 Month Warranty
Haltech warrants its products to be free from defects in material or workmanship for 12 months from the date of purchase.
- Defective units will be replaced or repaired when returned with proof of purchase
- Returns must ship via tracked freight with insurance and proof of delivery
- Sensors and accessories supplied in sealed packaging are non-refundable once the seal is opened (per Haltech policy). This does not affect your rights for faulty goods
- Off-road / competition use only. See Haltech's emissions disclaimer on each product
Tuning support, harness diagnostics and ECU configuration available in-workshop at Willys.
Read the full Haltech warranty terms →
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Available to order – dispatched in 1–2 business days.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug’n’Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness. A simple Haltech Plug’n’Play product that allows you to be up and running in just a few hours. The quick start guide will walk you through installation of the Haltech Plug’n’Play adaptor into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
