5 Bar “TI” MAP Sensor
$375.00
or 4 interest-free payments of $93.75 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
OverviewPlease take care when wiring this sensor as incorrect wiring will damage this sensor!All "TI " MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and…
Available to order – dispatched in 1-2 business days
Send your rego for a confirmed fit
Once we’ve confirmed it fits your vehicle, our Fitment Guarantee covers it. If it doesn’t fit, we pay the return freight both ways and refund or exchange it. No restocking fee. How it works
Covered only after we confirm the fit from your rego or VIN. Tell us within 30 days, with the part unused. Special-order, freight-quoted and tune/software items are excluded. Change of mind is different: 30 days, a 15% restocking fee, and you pay the return postage.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
Universal fit Not made for one vehicle. It fits by size, thread or specification, so check the dimensions in the description against your application.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
- Overview
Please take care when wiring this sensor as incorrect wiring will damage this sensor!
All "TI " MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty.
Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.
Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors.
Notes:"TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
Specifications
| Brand | Haltech |
|---|---|
| Part number | HT-010110 |
| Thread | 1/8 NPT |
| In the box | Matching Delphi plug and 3 pins, -4 AN & 5 mm hosetail adaptors |
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Available to order – dispatched in 1–2 business days.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Haltech: Limited 12 Month Warranty
Haltech warrants its products to be free from defects in material or workmanship for 12 months from the date of purchase.
- Defective units will be replaced or repaired when returned with proof of purchase
- Returns must ship via tracked freight with insurance and proof of delivery
- Sensors and accessories supplied in sealed packaging are non-refundable once the seal is opened (per Haltech policy). This does not affect your rights for faulty goods
- Off-road / competition use only. See Haltech's emissions disclaimer on each product
Tuning support, harness diagnostics and ECU configuration available in-workshop at Willys.
Read the full Haltech warranty terms →
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
