Scheid Diesel | Cummins 12 Valve Injector Lines to Suit Dual Ram Intake
$2,274.00
Zip and humm are available over the phone: (07) 5619 7869
Pre-bent by hand and custom fitted in house to assure first time fit. Price is per set of six lines. These are hand bent fuel lines designed to fit with a Twin Ram (Dual) intake horn without having to bend the #1 and #2 lines.
Available on back-order
Check fitment by rego or VINFast AU-Wide Shipping
Special order – no change-of-mind returns
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| — | — | — | — | 6BT |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Scheid Diesel | Cummins 12 Valve Injector Lines to Suit Dual Ram Intake
Scheid Diesel Service Co offer the highest quality injector lines
Mild steel fuel set for 12 valve Dodge with banks dual Ram intake.
Pre-bent by hand and custom fitted in house to assure first time fit.
Price is per set of six lines.
These are hand bent fuel lines designed to fit with a Twin Ram (Dual) intake horn without having to bend the #1 and #2 lines.
For use in 94-98 12V Cummins trucks.
Fuel Lines are available in .078, .084, .093 and .120 in mild steel. And .093 and .120 in stainless steel (stainless steel is not recommended for daily drivers/street trucks due to engine vibration)
Clamps are additional.
High Pressure Fuel line install instructions:
When installing clamped line sets, loosen all clamps, install lines and tighten to 25 ft lbs of torque.
When tightening clamps you may need slight repositioning of line clamps to avoid interference.
Please note: All factory support brackets, braces and line clamps must be re installed
These lines will work with a Twin Ram intake.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
Scheid Diesel | Cummins 12 Valve Injector Lines to Suit Dual Ram Intake Scheid Diesel Service Co offer the highest quality injector lines Mild steel fuel set for 12 valve Dodge with banks dual Ram intake. Pre-bent by hand and custom fitted in house to assure first time fit.
Additional information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
