Power Driven Diesel | 24v – 7 x 010 SAC Nozzle Set
$762.00
or 4 interest-free payments of $190.50 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Set of 6 Nozzles Complete installation kit included Compatible with 1998.5 to 2002 model years. Power Driven Diesel nozzles are offered as an economical option for those wanting to assemble their own injectors.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine | Notes |
|---|---|---|---|---|---|
| Dodge / Ram | Cummins 2nd Gen (1994-2002) | — | mid-1998 – 2002 | ISB | Compatible with 1998.5 to 2002 model years |
Years are as listed by the manufacturer/supplier and may be US model years for US-built trucks.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Power Driven Diesel | 24v – 7 x 010 SAC Nozzle Set
- 7x.010″ Nozzle Size
- SAC-Style Nozzle
- 153-degree Spray Angle
- Generally considered to be +150hp over stock.
- Set of 6 Nozzles
- Complete installation kit included
- Compatible with 1998.5 to 2002 model years.
Power Driven Diesel nozzles are offered as an economical option for those wanting to assemble their own injectors.
From daily drivers, to work trucks, to dedicated competition vehicles, our nozzles have proven themselves. Each set of nozzles comes with new sealing washers, drain manifold washers, and dust seals.
CHECK OUT THE VIDEO IN OUR BLOG FOR MORE INFO ON FITTING.
What’s the difference between 6-hole and 7-hole nozzles?
For a given flow amount, a nozzle with a smaller number of holes and a larger hole size will develop a more powerful jet of fuel, which will penetrate deeper into the piston bowl. This means the fuel jet will have some resistance to ignition until it is farther into the bowl.
Conversely, a nozzle of the same flow amount, but with a larger number of holes and smaller hole size will produce a finer spray of fuel, which doesn’t penetrate as far into the bowl but ignites more readily. The amount of bowl penetration that is ideal depends on the RPM and boost level of the application.
At low RPM, the 7-hole nozzle atomises the fuel into the charge air better, which results in increased burn efficiency. However, there is a cross-over point around 2000 RPM where the deeper penetration of the 6-hole nozzle is required to maintain burn efficiency at higher levels of boost and RPM, as the charge air conditions in the bowl become increasingly dense and turbulent.
While apparent, these differences between 6 and 7-hole are minimal until 3000 RPM. Overall, the 7-hole nozzle is by far the most common, and is the best choice for most 24v applications. 6-hole injectors may perform better on trucks running a lot of boost and at higher RPM.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
Power Driven Diesel | 24v – 7 x 010 SAC Nozzle Set 7x.010″ Nozzle Size SAC-Style Nozzle 153-degree Spray Angle Generally considered to be +150hp over stock. Set of 6 Nozzles Complete installation kit included Compatible with 1998.5 to 2002 model years.
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
