P Pump Accelerator Cable, Return Spring and Bracket kit
$426.00
or 4 interest-free payments of $106.50 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
P Pump Accelerator Cable, Return Spring and Bracket kit Complete Universal Throttle Kit for P7100 Pumps with Return Spring Setup This kit is set up with a 2.3m throttle cable that is made to be cut to whatever length you need.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine | Notes |
|---|---|---|---|---|---|
| — | — | — | — | 4BT | P7100 pump |
| Dodge / Ram | Cummins 2nd Gen (1994-2002) | — | 1994 – 1998 | 6BT |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Years are as listed by the manufacturer/supplier and may be US model years for US-built trucks.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
P Pump Accelerator Cable, Return Spring and Bracket kit
Complete Universal Throttle Kit for P7100 Pumps with Return Spring Setup
This kit is set up with a 2.3m throttle cable that is made to be cut to whatever length you need.
Eliminate the stock expensive complex throttle kit with this simple setup that comes with a universal throttle cable to help with your engine swap.
Includes everything in the picture.
Note – Most pumps have a tamper proof bolt on top of the timing pin housing that needs to be removed.
This makes it much easier to install this kit with the pump removed from the motor.
This will clear the stock shut off solenoid.
Please measure to make sure this throttle cable is long enough. Note how the cable is routed in the picture.
This kit comes with a 2.3m cut to length throttle cable – Suits both 4BT and 6BT P7100 Pumps.
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
P Pump Accelerator Cable, Return Spring and Bracket kit Complete Universal Throttle Kit for P7100 Pumps with Return Spring Setup This kit is set up with a 2.3m throttle cable that is made to be cut to whatever length you need.
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
