ISSPRO | Fuel Pressure Snubber Kit for Cummins
$186.00
or 4 interest-free payments of $46.50 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
The kit consists of a tapped banjo bolt, a needle valve (fully tighten handle then loosened 1/8-turn), a section of hose, a female-female coupler, and an orifice snubber, which are installed in the above listed order.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Dodge / Ram | — | — | 1989 – 2002 | Cummins |
Years are as listed by the manufacturer/supplier and may be US model years for US-built trucks.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
ISSPRO | Fuel Pressure Snubber Kit for Cummins
Fitment Notes: 1989-2002 Dodge Cummins
ISSPRO EV², Performax Snubber Kit for 1989-2002 Dodge Cummins diesels.
The kit consists of a tapped banjo bolt, a needle valve (fully tighten handle then loosened 1/8-turn), a section of hose, a female-female coupler, and an orifice snubber, which are installed in the above listed order. Install Snubber Kit R78827 with the needle valve installed in the test port of the fuel pressure regulator.
If using an aftermarket fuel filter system such as a FASS or AirDog with self-contained fuel filters, use Snubber Kit R78827 with the needle valve installed in the test port of the fuel system (typically in the main block near the outlet). If installing in a tee-fitting in the fuel supply hose, use the same kit and install the tee as far from the injection pump as possible.
If using the stock fuel filter housing, the banjo bolt should be installed on fuel filter output banjo fitting (for the hose which runs to the injection pump, typically on the bottom of the fuel filter housing). Installing on the other (injection pump) side of the same hose will place the sensor too close to the pulsations of the injection pump. After installation and tightening of fittings, secure the hose and sensor to existing hoses, brackets or wiring to protect them from damage and interference with moving parts.
ISSPRO Snubber Kit:
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
ISSPRO | Fuel Pressure Snubber Kit for Cummins Fitment Notes: 1989-2002 Dodge Cummins ISSPRO EV², Performax Snubber Kit for 1989-2002 Dodge Cummins diesels.
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
