Fluidampr (P/N 300002) Cummins Drill Pin Kit
$198.00
or 4 interest-free payments of $49.50 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Fluidampr (P/N 300002) Cummins Drill Pin Kit For high performance 5.9L and 6.7L Cummins® engines that exceed 3,500rpm, Fluidampr recommends the damper be pinned to the crankshaft.
Fast AU-Wide Shipping
Returns within 30 days
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Dodge / Ram | Cummins 1st Gen (1989-1993) | — | 1989 – 1993 | 6BT |
| Dodge / Ram | Cummins 2nd Gen (1994-2002) | — | 1994 – 1998 | 6BT |
| Dodge / Ram | Cummins 2nd Gen (1994-2002) | — | mid-1998 – 2002 | ISB |
| Dodge / Ram | Ram 2500-3500 | Cummins 3rd Gen (2003-2007) | 2003 – 2007 | ISB |
| Dodge / Ram | Ram 2500-3500 | Cummins 4th Gen (2007.5-2018) | mid-2007 – 2018 | ISB 6.7L |
Years are as listed by the manufacturer/supplier and may be US model years for US-built trucks.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
Fluidampr (P/N 300002) Cummins Drill Pin Kit
- For high performance 5.9L and 6.7L Cummins® engines that exceed 3,500rpm, Fluidampr recommends the damper be pinned to the crankshaft.
- Highly recommended for drag racing and sled pulling.
- The current Fluidampr drill pin kit (p/n 300002) is upgraded from a roll pin to a stronger .0005” press fit steel dowel pin(s).
- New to the kit is a smaller 7.7mm drill and reamer tool.
- A drill fixture is included for accurate alignment with the damper’s pre-drilled pin hole(s).
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
Fluidampr (P/N 300002) Cummins Drill Pin Kit For high performance 5.9L and 6.7L Cummins® engines that exceed 3,500rpm, Fluidampr recommends the damper be pinned to the crankshaft. Highly recommended for drag racing and sled pulling.
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 25 × 20 × 12 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
