Firepunk Engineering Anteater Pro STC
$3,594.00
Zip and humm are available over the phone: (07) 5619 7869
The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission’s shift patterns.
Available on back-order
Check fitment by rego or VINFast AU-Wide Shipping
Special order – no change-of-mind returns
12 month warranty
Will it fit your vehicle?
| Make | Model | Series | Years | Engine | Notes |
|---|---|---|---|---|---|
| Dodge / Ram | — | — | — | — | 47-series and 48-series (618) transmissions; replaces PCM trans control |
A dash means the listing does not narrow it down that far (for example no build dates are listed). Check with us if your vehicle was built near a model change.
Fitment listings are a guide. Not sure? Send us your rego or VIN and our team will check the part for your vehicle, before or after you order.
Description
The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions.
It takes the place of a factory PCM and gives total control over the transmission’s shift patterns.
The main controller is contained in a weatherproof enclosure and the wiring harness exceeds OEM specifications.
It also includes an in-cab wired remote with display screen that allows the end user to disable overdrive as well as choose between three separate shift tune tables.
Additionally the Anteater Pro gives the end user the ability to switch to a manual mode to use either a factory 68RFE tap shifter or their own switches to control up and down shifts.
Shipped Australia-Wide
- Ships direct from our supplier in NSW with tracking.
- Road freight is calculated at checkout for your address.
- Delivery usually takes 2–10 business days after dispatch, depending on your location.
- Need your tracking number? Once your order has shipped, email sales@willysworkshop.com.au with your order number and we’ll send you the carrier and tracking details.
Freight question? Call us on (07) 5619 7869.
The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission’s shift patterns.
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 40 × 30 × 20 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
