68RFE REUSABLE BILLET SPIN ON FILTER
$360.69
or 4 interest-free payments of $90.17 with Afterpay on orders up to $2,000Zip and humm are available over the phone: (07) 5619 7869
Randy’s Transmissions fuel filter kit. Protects your fuel system from water and contaminants for longer component life. Imported to order and backed by the team at Willys Workshop.
Available to order
Fast AU-Wide Shipping
Special order – no change-of-mind returns
12 month warranty
Description
Description
68RFE Reusable Billet Spin-On Filter – ALL YEARS
Every time you service your 68RFE, the stamped steel spin-on filter gets thrown away.
We figured there had to be a better way – so we engineered it.
The Randy’s Reusable Billet Spin-On Filter replaces the factory disposable unit with a serviceable billet aluminum housing and washable mesh filter cartridge that can be cleaned and reused during routine maintenance. Less waste, fewer replacement filters, and one less part you’ll need to keep buying.
Billet Aluminum Housing
The housing is machined from billet aluminum instead of the thin stamped construction found in traditional disposable filters.
Not only does it look better, but it was built to be taken apart, cleaned, and put back into service again and again.
Finished in red anodizing, it’s a small detail that stands out every time you’re servicing your 68.
And its made from aircraft grade aluminum for dependability when you’re going Mach 1
Serviceable 100-Micron Filter Cartridge
Inside the housing is a serviceable 100-micron filter cartridge designed to capture debris while allowing maximum fluid flow to the torque converter.
What makes this filter special is that it lets you keep an eye on the health of your transmission and torque converter. Simply inspect the filter during service to spot debris or contaminants that could indicate wear
before a small problem becomes a big one.
Rather than replacing the entire filter assembly during service, simply remove the cartridge, clean it, allow it to dry completely, and reinstall it.
It’s a simple concept, but one that can save money over the life of the truck.
Internal Drain-Back Valve
The filter features an internal drain-back valve to help keep fluid where it’s supposed to be when the truck is shut off.
It’s one of those details most people will never see, but details matter when you’re building parts that are meant to last.
Built to Be Serviced
If you’ve ever fought with a filter that didn’t want to come apart, or a broken plastic filter adapter, you’ll appreciate the little details we put into this.
We machined the filter head with an integrated billet filter screw – which allows 30% more flow.
Machined knurling around the filter head provides extra grip during installation and removal, while the hex-shaped bottom cap makes accessing the filter cartridge straightforward when it’s time for service.
Features
- Billet aluminum reusable housing
- Serviceable 100-micron filter cartridge
- Internal drain-back valve
- Red anodized finish
- Machined knurling for improved grip
- Hex-head bottom cap for easy cartridge removal
- Designed to be cleaned and reused during routine service
Service Note
When cleaning the filter cartridge, do not use compressed air.
Compressed air can damage the filter media. We recommend using an aerosol parts cleaner such as brake cleaner to wash the cartridge. Once cleaned, allow the filter to dry completely before reinstalling.
Imported to Order: Through Our Workshop
- Brought in from our supplier and received at our Sunshine Coast workshop first.
- From there we can build, tune or fit it for you, or ship it on to you or your mechanic.
- Freight quoted after you order. We quote the exact freight to your door before dispatch. Any workshop work is quoted on enquiry.
- Typical lead time is confirmed at the time of order.
Freight questions or a build quote: call (07) 5619 7869 or email sales@willysworkshop.com.au.
Additional information
| Weight | 0.91 kg |
|---|---|
| Dimensions | 25 × 20 × 20 cm |
Warranty: 12 months from Willys Workshop
Sold and warranted by Willys Workshop. Parts carry our 12-month warranty against defects, from the date of purchase or installation (whichever is later), subject to any manufacturer terms and fair wear and tear (Terms & Conditions, clause 7.1(b)). This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.
- 30-day change-of-mind returns on eligible items: unused, uninstalled and in the original packaging, with a Return Authorisation from us first. A 15% restocking fee applies and return postage is at your cost.
- Wrong fit: if a part covered by our Fitment Guarantee doesn’t fit, we pay the return freight both ways and there’s no restocking fee.
- Special-order or imported-to-order items, electrical parts, ECUs and tuners once registered, connected or flashed, parts that have been fitted or modified, and clearance items can’t be returned for change of mind. Your rights for faulty goods still apply.
- Refunds are made to your original payment method within 14 business days of us receiving and inspecting the return.
Full details: Returns & Refund Policy and Terms & Conditions.
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
