Description
- Overview
- Suitable for Diesel, gasoline, E85, engine oil, transmission oil
– Installation Notes: Maximum permissible overpressure is 2000kpa (20 bar). The surrounding system shall be designed in such a way that potential pressure peaks in the system do not exceed the permissible overpressure of the sensor. Attention especially needs to be paid to hydraulic effects like cavitation and dynamic pressure shocks. Prevention of cavitation at the sensor shall be ensured in each operating state, not recommended for water/coolant which is significantly more susceptible to cavitation than other fluids.
– Installation torque: 37.5 ± 2.5 Nm
– Mount with orifice pointing downwards : 0 to 45° from vertical
– Supply voltage: 5.0 ± 0.25 V
Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.
Notes: Used to measure fluid pressure and temperature
Pressure Range 0-145 PSI
Temperature Range -40 to 140 Deg C
Supplied with adaptor to convert M10x 1.0 thread to 1/8NPT
Shipped Australia-Wide
- Dispatched from within Australia with tracking.
- Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
- Shipping is calculated at checkout based on size, weight and your delivery address.
- Estimated delivery 2–7 business days depending on your location.
Freight question? Call us on (07) 5619 7869.
– Overview- Suitable for Diesel, gasoline, E85, engine oil, transmission oil – Installation Notes: Maximum permissible overpressure is 2000kpa (20 bar).
Haltech — Limited 12 Month Warranty
Haltech warrants its products to be free from defects in material or workmanship for 12 months from the date of purchase.
- Defective units will be replaced or repaired when returned with proof of purchase
- Returns must ship via tracked freight with insurance and proof of delivery
- Products supplied in sealed packaging cannot be returned once opened (per Haltech policy)
- Off-road / competition use only — see Haltech's emissions disclaimer on each product
Tuning support, harness diagnostics and ECU configuration available in-workshop at Willys.
Read the full Haltech warranty terms →
Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.
