Name: Nexus R5 VCU
Brand: Haltech
SKU: WW-HAL-00561
Price: 5895.00 AUD
Availability: InStock

Description

Genuine Haltech gear, stocked and supported by the team at Willys Workshop — diesel and performance specialists in Brisbane and the Sunshine Coast.

Overview

VCU OVERVIEW

Nexus R5 is Haltech’s flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).

4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)

12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)

18 x peak/hold injector drivers (can be used as low side drive outputs)

12 x low current ignition outputs (can be used as low side drive outputs)

8 x low side drive outputs, PWM capable (DPOs)

4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle

Features

VCU FEATURES
Controlled via NSP (Nexus Software Programmer)
Long Term Learning
Stepper Motor Control
4D Closed Loop Boost Control
Closed Loop CO2 Control
Rotational Idle
Launch Control
Traction Control
Anti-Lag
Dual Knock Control
Trans Brake Control
Race Timer
Multi Stage Fuel Injection
Multi-level Engine Protection

Specifications

| Analog Voltage Inputs (AVI) | 23 |
| Differential Engine Position Inputs | 2 (Trigger and Home) |
| Digital Pulsed Inputs (DPI) | 0 |
| Synchronized Pulsed Inputs (SPI) | 10 |
| Knock Sensor Inputs | 2 |
| On-board Wideband Controller | 2 x NTK/LSU 4.9 |
| Injection | 18 (peak and hold) |
| Ignition | 12 |
| Ignition Switch Input | 1 |
| Engine Control Relay output | 0 |
| Total Digital Pulsed Outputs (DPO) | 8 |
| Half Bridge Outputs (HBO) | 4 8A |
| On-Board PDM | YES |
| 25A High Current Outputs (HCO) | 4 |
| CAN Bus Networks | 3 |
| MAP sensor | External |
| Inertia / G-Sensor | YES |
| USB 2.0 | USB-C |
| Low Power Up via Cable | YES |
| Wi-Fi | YES |

Note: Haltech products are intended for sanctioned off-road/competition use. Ask our team about compliant options for your application.

Shipped Australia-Wide

Dispatched from within Australia with tracking.
Same-day dispatch on in-stock orders placed before 11am AEST, Monday–Friday.
Shipping is calculated at checkout based on size, weight and your delivery address.
Estimated delivery 2–7 business days depending on your location.

Freight question? Call us on (07) 5619 7869.

VCU OVERVIEW Nexus R5 is Haltech’s flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)

Additional information

Weight	1.5 kg
Dimensions	25 × 20 × 12 cm

Haltech — Limited 12 Month Warranty

Haltech warrants its products to be free from defects in material or workmanship for 12 months from the date of purchase.

Defective units will be replaced or repaired when returned with proof of purchase
Returns must ship via tracked freight with insurance and proof of delivery
Products supplied in sealed packaging cannot be returned once opened (per Haltech policy)
Off-road / competition use only — see Haltech's emissions disclaimer on each product

Tuning support, harness diagnostics and ECU configuration available in-workshop at Willys.

Read the full Haltech warranty terms →

Warranty claims are coordinated through Willys Workshop. Email sales@willysworkshop.com.au or call Warana (07) 5619 7869 / Oxley (07) 3377 3421 with your order number and a description of the issue.