Description
60HP Tork Tek Overflow Valve
Low fuel pressure with your Air Dog and Fass Pump?
Increase your horse power and fuel pressure with your hot P7100 Cummins.
- OFV060HP Use with super street performance Cummins trucks
- Fuel pressure range of 43 to 50 PSI
- Raises fuel pressure at full power
The OFV060HP has the third smallest orifice for highly modified Cummins diesel engines. Your truck is street driven. Your fuel system, engine and turbo have been modified. Your horsepower will be in the 500 to 600HP range.
This valve is for super hot Cummins performance trucks using an AirDog, Raptor or FASS pump.
Yes it can be used for P pump conversions on the 24V Cummins.
What fuel pressure should you be running? Here is a general rule to determine the fuel pressure you should be at:
Multiply the governor spring rpm (in thousands) times 10. In other words, you want 10 PSI of fuel pressure per 1000 RPM of govenor speed.
If you installed a 3K govenor kit, you need a minimum of 30 PSI at full power. A 4K kit requires 40 PSI at WOT. 5K equals 50 PSI. Remember, this is at full power, not idle or cruise.
Do not use the HP valve on a stock fuel system! This valve will raise pressure spikes to the point that the stock fuel filter canister will blow a seal. The valve is intended for Cummins P7100 trucks using a FASS, Air Dog or high volume, performance fuel pump only.
